ECThe M engine control module is usually installed in a protective box in the engine compartment. It is a small computer composed of chips, capacitors, resistors, circuit boards and other components.
There is no picture. The engine control module of Buick Regal is in the engine compartment, which is the control center of the engine control system. The engine control module can provide 5V or 12V voltage to each sensor or switch, which is achieved by adjusting the feedback resistance of the power supply inside the engine control module.
The start relay is in the fuse box, the control module is the old ECM in the empty filter shell, and the new model is on the side of the left battery.
is the engine control main relay. The main function of ECM-MAIN is to supply power to the engine computer and control the functions of the engine computer.
I. ECM is an automobile engine control module and a core component of engine control. According to the input information of each sensor, it controls the fuel injection and ignition moment of the engine and provides the best control instructions for other output devices.
The reason for the failure of Dongfeng Tianlong truck EECU: the connectors of the CAN bus have virtual connection, the normal power supply connector, the virtual connection switch power supply circuit; through troubleshooting, it is found that the shutdown switch harness connector has water (close to the front wheel), and the contact needle corrosion; elimination method: rust removal through the contact needle, prevention After rust treatment, reconnect the troubleshooting.
EFI main relay is the main relay that supplies power to ECM, fuel vacuum switch valve, etc. Generally, the relay box on the side of the engine is located in the fuse box. It is a round iron shell with a connecting coil in the shell (as shown in the figure). Function: The main relay is controlled by KEY and is responsible for controlling the power supply of ECU and EFI systems.
The output insurance of the ecm main relay often bursts due to a short circuit in the line. Ecm masterThe relay output fuse often bursts and the line needs to be checked. The engine control harness ecu control line and the line next to the co-driver's debris box can be re-pulled to restart the vehicle. If the vehicle is no longer turned off, the fuse is normal, it can be used temporarily.
1. The fault code P0685 means: engine control module (ECM)/powertrain control module (PCM) power relay control circuit/open circuit.
2. The fault code P0685 means: engine control module (ECM)/powertrain control module (PCM) power relay control circuit/open circuit. The reasons for this kind of failure are the failure of the electric version of the engine or the problem of the relevant line.
3. Reason, for reference only: sensor damage, poor contact or signal interruption; poor engine maintenance; poor quality of fuel and oil; insufficient combustion of mixed gas; spark plug failure, ignition coil failure; fuel pump failure, oil line blockage; air conditioning filter element blockage.
The engine control module of Chevrolet Cruze is on the right side of the gearbox. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engine (resurrected plug engine), external combustion engine (Sterling engine, steam engine, etc.), jet engine, motor, etc.
The engine adjustment module of the Chevrolet Cruze is located on the right side of the gearbox.An engine is a machine that can convert other forms of energy into mechanical energy. Including internal combustion engine (resurrected plug engine), external combustion engine (String engine, steam engine, etc.), jet engine, motor, etc.
The engine control module of the Chevrolet Cruze is located on the right side of the gear box.
1. ECM (Engine Control Module) controls the operation of the entire engine just like the soul of the engine.
2. The main meaning of automobile ecm is as follows: the engine electronic control module (ECM for short) has the function of continuously monitoring and controlling the normal operation of the engine;In the modern engine management system, ECM is its core control.
3. The ECM on the vehicle refers to the Electronic Control Module of the vehicle, also known as the Engine Control Module. ECM is a small computer located in the engine compartment of the vehicle to monitor and control the operation of the engine.
Hearthstone arena deck Builder-APP, download it now, new users will receive a novice gift pack.
ECThe M engine control module is usually installed in a protective box in the engine compartment. It is a small computer composed of chips, capacitors, resistors, circuit boards and other components.
There is no picture. The engine control module of Buick Regal is in the engine compartment, which is the control center of the engine control system. The engine control module can provide 5V or 12V voltage to each sensor or switch, which is achieved by adjusting the feedback resistance of the power supply inside the engine control module.
The start relay is in the fuse box, the control module is the old ECM in the empty filter shell, and the new model is on the side of the left battery.
is the engine control main relay. The main function of ECM-MAIN is to supply power to the engine computer and control the functions of the engine computer.
I. ECM is an automobile engine control module and a core component of engine control. According to the input information of each sensor, it controls the fuel injection and ignition moment of the engine and provides the best control instructions for other output devices.
The reason for the failure of Dongfeng Tianlong truck EECU: the connectors of the CAN bus have virtual connection, the normal power supply connector, the virtual connection switch power supply circuit; through troubleshooting, it is found that the shutdown switch harness connector has water (close to the front wheel), and the contact needle corrosion; elimination method: rust removal through the contact needle, prevention After rust treatment, reconnect the troubleshooting.
EFI main relay is the main relay that supplies power to ECM, fuel vacuum switch valve, etc. Generally, the relay box on the side of the engine is located in the fuse box. It is a round iron shell with a connecting coil in the shell (as shown in the figure). Function: The main relay is controlled by KEY and is responsible for controlling the power supply of ECU and EFI systems.
The output insurance of the ecm main relay often bursts due to a short circuit in the line. Ecm masterThe relay output fuse often bursts and the line needs to be checked. The engine control harness ecu control line and the line next to the co-driver's debris box can be re-pulled to restart the vehicle. If the vehicle is no longer turned off, the fuse is normal, it can be used temporarily.
1. The fault code P0685 means: engine control module (ECM)/powertrain control module (PCM) power relay control circuit/open circuit.
2. The fault code P0685 means: engine control module (ECM)/powertrain control module (PCM) power relay control circuit/open circuit. The reasons for this kind of failure are the failure of the electric version of the engine or the problem of the relevant line.
3. Reason, for reference only: sensor damage, poor contact or signal interruption; poor engine maintenance; poor quality of fuel and oil; insufficient combustion of mixed gas; spark plug failure, ignition coil failure; fuel pump failure, oil line blockage; air conditioning filter element blockage.
The engine control module of Chevrolet Cruze is on the right side of the gearbox. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engine (resurrected plug engine), external combustion engine (Sterling engine, steam engine, etc.), jet engine, motor, etc.
The engine adjustment module of the Chevrolet Cruze is located on the right side of the gearbox.An engine is a machine that can convert other forms of energy into mechanical energy. Including internal combustion engine (resurrected plug engine), external combustion engine (String engine, steam engine, etc.), jet engine, motor, etc.
The engine control module of the Chevrolet Cruze is located on the right side of the gear box.
1. ECM (Engine Control Module) controls the operation of the entire engine just like the soul of the engine.
2. The main meaning of automobile ecm is as follows: the engine electronic control module (ECM for short) has the function of continuously monitoring and controlling the normal operation of the engine;In the modern engine management system, ECM is its core control.
3. The ECM on the vehicle refers to the Electronic Control Module of the vehicle, also known as the Engine Control Module. ECM is a small computer located in the engine compartment of the vehicle to monitor and control the operation of the engine.
754.76MB
Check633.38MB
Check554.21MB
Check978.57MB
Check327.56MB
Check117.98MB
Check838.51MB
Check912.56MB
Check354.29MB
Check642.72MB
Check479.27MB
Check368.47MB
Check976.34MB
Check271.65MB
Check366.48MB
Check897.85MB
Check252.64MB
Check246.46MB
Check833.61MB
Check347.49MB
Check673.69MB
Check214.42MB
Check688.25MB
Check319.81MB
Check284.44MB
Check954.79MB
Check922.88MB
Check695.89MB
Check454.93MB
Check497.48MB
Check263.23MB
Check847.17MB
Check338.93MB
Check822.92MB
Check558.66MB
Check814.94MB
CheckScan to install
Hearthstone arena deck Builder to discover more
Netizen comments More
1100 PAGCOR online casino free 100
2025-02-11 09:41 recommend
349 Casino Plus login register
2025-02-11 09:10 recommend
1305 100 free bonus casino no deposit GCash
2025-02-11 07:44 recommend
1282 Casino Plus GCash login
2025-02-11 07:35 recommend
649 Arena Plus login
2025-02-11 07:29 recommend